金属衬底在石墨烯化学气相沉积生长中的作用

以过渡金属为催化衬底的化学气相沉积法(Chemical Vapor Deposition，CVD)已经可以制备与机械剥离样品相媲美的石墨烯，是实现石墨烯工业应用的关键技术之一。原子尺度理论研究能够帮助我们深刻理解石墨烯生长机理，为实验现象提供合理的解释，并有可能成为将来实验设计的理论指导。本文从理论计算的角度，总结了各种金属衬底在石墨烯CVD生长过程中的各种作用与相应的机理，包括在催化碳源裂解、降低石墨烯成核密度等，催化加快石墨烯快速生长，修复石墨烯生长过程中产生的缺陷，控制外延生长石墨烯的晶格取向，以及在降温过程中石墨烯褶皱与金属表面台阶束的形成过程等。在本文最后，我们对当前石墨烯生长领域中亟需解决的理论问题进行了深入探讨与展望。     

Improved Method for the Total Synthesis of Azaperone and Investigation of Its Electrochemical Behavior in Aqueous Solution

Azaperone, with anti-anxiety and anti-aggressive activities used in veterinary medicine, is a member of the butyrophenone class. It is ordinarily utilized for a wide range of indications, such as sedation, obstetrics, and anesthesia. In this research, an improved synthetic route is presented for azaperone using a phase-transfer catalyst(PTC). In general, it was synthesized as a dopamine antagonist in four steps. The bis(2-chloroethyl) amine intermediate is easily obtained after the conversion of the alcohol groups into the chloride leaving group using thionyl chloride(95% yields). The alkylation of commercially available 2-amino pyridine in the presence of PTC was then carried out, giving 1-(pyridin-2-yl) piperazine with 75% yield. 1-(Pyridin-2-yl) piperazine was finally alkylated using 4-chloro-1-(4-fluorophenyl) butan-1-one to achieve azaperone with 60% yield. The butyrophenone intermediate was obtained via the Friedel-Crafts reaction of fluorobenzene with 4-chlorobutyryl chloride in the presence of AlCl₃. High efficiency, gentle reaction conditions, and fast and simple procedure are the advantages of this method. Also, the electrochemical oxidation behaviour of azaperone was investigated using cyclic and differential pulse voltammetry techniques. Cyclic voltammetric studies indicated an irreversible process for azaperone electro-oxidation with a peak potential of 0.78 V in a phosphate buffer solution(pH=7.0) vs. Ag/AgCl(saturated KCl) electrode. The value of the peak current vs. the azaperone concentration was enhanced linearly in the range of 10―70 μmol/L, and the detection limit was found to be 3.33 μmol/L.     

Growth and characterization of two-dimensional crystals for communication and energy applications

This review article covers the growth and characterization of two-dimensional (2D) crystals of transition metal chalcogenides, h-BN, graphene, etc. The chemical vapor transport method for bulk single crystal growth is discussed in detail. Top-down methods like mechanical and liquid exfoliation and bottom-up methods like chemical vapor deposition and molecular beam epitaxy for mono/few-layer growth are described. The optimal characterization techniques such as optical, atomic force, scanning electron, and Raman spectroscopy for identification of mono/few-layer(s) of the 2D crystals are discussed. In addition, a survey was done for the application of 2D crystals for both creation and deterministic transfer of single-photon sources and photovoltaic systems. Finally, the application of plasmonic nanoantenna was proposed for enhanced solar-to-electrical energy conversion and faster/brighter quantum communication devices.     

S-O bond chemically constrained NiS2/rGO nanocomposite with enhanced Na-ion storage capacity

NiS₂ has become a research hotspot of anode materials for Na-ion batteries due to its high theoretical specific capacity. However, the volume effect, the dissolution of polysulfide intermediates and the low conductivity during the charge/discharge process lead to the low specific capacity and poor cycling stability. NiS₂/rGO nanocomposite was prepared by a facile two-step process: GO was prepared by modified Hummers method, and then NiS₂/rGO nanocomposite was synthesized by l-cys assisted hydrothermal method. NiS₂/rGO nanocomposite shows excellent cycle performance and rate performance, which could be attributed to the mesoporous structure on the graphene skeleton with high conductivity. Besides, the chemical constraint of a unique SO bond on NiS₂ could inhibit the dissolution of intermediates and the loss of irreversible capacity.     

Effect of chemical parameters on pyrene degradation in soil in a pulsed discharge plasma system

Degradation of pyrene in soil in a net-to-net pulsed discharge plasma (PDP) system was reviewed. Effect of main chemical parameters, including air flow rate, pyrene concentration, initial pH and soil moisture content on pyrene degradation was examined. The obtained results show that 87.9% of pyrene could be removed under the condition of 60 min reaction; increasing of air flow rate within 1 L min⁻¹ was favorable for degradation; pyrene removal was decreased with the increase of initial pyrene concentration; oxidation of pyrene was more evident in acidic soil; enhancement of soil moisture content has no benefit on pyrene degradation.     

用于液体激光介质的Nd~(3+)离子掺杂氟化镧纳米颗粒的制备与性能表征

设计并合成了掺杂不同Nd3+离子浓度的氟化镧纳米颗粒,并用油酸进行了表面修饰,使得这类纳米颗粒可分散于常见的有机溶剂中形成透明、均一、稳定的溶液。对纳米颗粒的结构、晶相以及发光性能进行了表征。固体和溶液材料在1 060 nm都有强的发射峰,说明纳米晶格可有效地保护Nd3+离子免受外界环境对发光的猝灭影响。纳米颗粒有机溶液的吸收损耗和散射损耗测试结果表明,其总损耗系数能够满足激光介质材料的损耗要求,为该材料的实用化打下了基础。     

Determination of cobalt ion based on polyethyleneimine modified silver nanoclustersEI北大核心CSCD

PolyethyleneiminePEImodified silver nanoclustersAg NCswere synthesized through chemical reduction method by using PEI as stabilizerAgNO3 as silve source and ascorbic acid as reducing agentand it was applied to the detection of cobalt ions. It was found that the fluorescence of the silver nanoclusters was quenched by Co2+ for the aggregation of PEI-Ag NCs caused by the coordination between cobalt ion and amino group on polyethyleneimine. Under the optimized experimental conditionsthe fluorescence quenching degree of PEI-Ag NCs was piecewise linear with the concentration of cobalt ion in the range of 8.30×10-7-4.17×10-4 mol/L and the detection limit was 0.41 μµmol/L. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Observation of unusual Griffith’s phase behavior in quadruple perovskite oxide CaCu3Mn4O12 (CCMO) synthesized through chemical route

The CaCu₃Mn₄O₁₂ (CCMO) ceramic was successfully synthesized through the chemical route. The phase formation was confirmed by the X-ray diffraction pattern. Thermogravimetric (TGA), FT-IR, SEM, TEM, EDX, and XPS analysis were performed for investigation of the thermal behavior, phase identification, microstructural analysis, elemental analysis and oxidation state of the CCMO ceramic respectively. FT-IR spectra confirmed the existence of MnO₆ octahedral in body-centered cubic (BCC) complex perovskite oxide that resembles the CaCu₃Ti₄O₁₂ structure. The average particle size was observed by TEM in the range between 100 and 200 nm. AFM shows the average roughness of the surface was found to be in the range of 30 ± 5 nm. XPS and EDX studies confirmed the purity and oxidation state of the CCMO ceramic. The synthesized material shows very interesting unique Griffith’s phase (T_G) results that arise disorder in magnetic susceptibility in which ferromagnetic transition was to be observed in the paramagnetic region.     

Xe对NO(X)微分截面和非弹性散射中的碰撞诱导旋转准直

本文对NO(X)-Xe碰撞系统在碰撞能量为519 cm^-1，测量了完全?-双峰分解的微分截面和碰撞引起的旋转准直力矩. 同时结合初始量子态选择，使用六极杆的非均质电场，借助量子态分辨的测量，利用(1+1'')共振增强的多光子电离和速度离子成像. 结果显示，微分截面以及偏振相关的微分截面均显示与从头算势能面上进行的量子力学散射计算[J. K?os etal. J. Chem. Phys. 137, 014312 (2012)]一致. 通过与准经典轨迹、硬壳势能的量子力学散射以及运动近端模型的比较，评估了势能对所测微分截面和碰撞引起的旋转准直力矩的影响.     

无处不在的化学——化学动力学

Starting from an example of how to extinguish a fire, this article illustrates how chemical dynamics plays a role in our life. It also introduces what is chemical dynamics and the contribution of Dutch chemist Jacobus H. van't Hoff to chemical dynamics. The horse racing analogy is used to illustrate how the amount of reactants, energy, catalysts and other factors affect the chemical reaction rate.